If you need to disable your car immobilizer, you may want to use Immo Off Files.zipl, a collection of software and files that can help you repair or bypass the immobilizer system. Immo Off Files.zipl contains thousands of downloadable software and files that can disable immobilizer, decode engine ECU and find pin code, program new key, edit The method is pretty simple, you take a thin flat, head screwdriver and hammer it into the keyhole. The point here is to break the key locks inside so that the cylinder turns freely. If you do the method properly, it will only take a couple of swings, and then you turn the screwdriver just like the factory key. To do this, turn on the ignition, use your centralized button to enter the digits, several quick presses (example: 2 for digit 2) then a stop of one and a half seconds to validate the digit and resume, repeat the operation until you have entered the entire code. This should allow your Mercedes Slk to start without having to remove the immobiliser. One option is to take it to a dealer to get a new key and get the car re-coded, but that is likely to quite expensive. There are some suggestions on Vauxhall forums, but probably the best solution is to take it to an autoelectrician. Try a few numbers and hopefully you'll find one who has encountered this problem (or something similar) before Indicators flash, doors unlock and courtesy lights turn on when it is unset. If I sit in the car with the alarm set and move around the alarm goes off. This leads me to think that the alarm functions are working but the immobilizer is not and the car is stuck with the immobilizer active. v5xg73Q.

how to disable car immobilizer